The most vulnerable part of any shoe is the heel. That is why if it seemed to you that your shoes or boots are not very stable, contact a shoe workshop. Or, if possible, strengthen the heel yourself.
Instruction manual
1
The most vulnerable part of any shoe is the heel. That is why, if it seemed to you that your shoes or boots are not very stable, contact the shoe shop. Or, if possible, strengthen the heel yourself. The most vulnerable part of any shoe is the heel. That is why, if it seemed to you that your shoes or boots are not very stable, contact the shoe shop. Or, if possible, strengthen the heel yourself.
2
You can do without the heel, if the insole is dense and without gaps. Take 4-5 self-tapping screws and fasten the heel around the edges and in the middle, also through the instep support, to get a square or square with a dot inside. This way you will also create a plane that holds it.
3
If you think that the heel is still unstable, strengthen the screws. To prevent them from breaking, fix the hats by drowning them a little in the heel or insole using a large drill. You should not take more than 3-5 screws, otherwise the heel will resemble a sieve and will fall apart much faster than it will fall off. If you get enough dexterity, then one or two will be enough for you over time. Indeed, in this case, the likelihood of drilling through the heel increases and thereby hopelessly spoil it.
4
Please note: for different types of heels you may need various self-tapping screws. In addition, their number depends on the size of the heel, and the initial quality of the shoe. The diameter of their hats should be such that they are not felt when walking. Choose the correct drilling angle so as not to spoil the shoes.
