The split system consists of two blocks: external and internal placement, interconnected. This design allows the device to maintain the required temperature in the room and purify the air, while making a minimum of noise.
Instruction manual
1
Perhaps the most important characteristic of an air conditioner is its cooling capacity. Experts recommend calculating power, focusing on the area of the room and the height of the ceilings. So for 10 square meters of area one kilowatt of power will be required, and if the ceiling height in the room exceeds three meters, increase the figure by another 10 - 15%.
2
Make sure the device has an inverter. In the absence of this device, the air conditioner can only operate at maximum power. Therefore, in order to maintain the required temperature, you will have to turn the air conditioner on and off every now and then, which will inevitably lead to early wear of the equipment. In turn, in inverter air conditioners, the power is regulated so that the compressor runs continuously and with a small load. In addition to extending the life of the system, this mode of operation reduces energy consumption.
3
The vast majority of low-cost models have only one operating mode - cooling. However, for residents of Russia it would be wiser to buy a split system that can work for heating. There are also air conditioners that can operate in rapid cooling and dehumidification modes. When purchasing a device with additional functions, decide how really they are needed. Any of them significantly increases the cost of the product, not at all guaranteeing its reliability.
4
The most popular today are split systems with the option of air purification. Special filters remove various impurities from the air, making it easier for people suffering from allergies and upper respiratory tract diseases.
5
Remember that the efficiency and service life of the equipment depends on how well the climate equipment is installed and commissioned. Therefore, do not save on professional installation of a split system.
