Metal-plastic pipes have several undoubted advantages over other types of these products. Installation of such a pipeline is simple, and communications are reliable and durable.
Instruction manual
1
Plastic pipes combine the best qualities of polypropylene and metal, so the performance of these products is very high. The metal-plastic pipe is multilayer. Each of its shells is high-quality PEX polyethylene, which provides it with flexibility. This is an important advantage of metalloplastics over polypropylene and metal, in which there is no ductility.
2
Significantly greater smoothness of the inner surface of plastic pipes provides high throughput with a smaller diameter. The roughness of PEX polyethylene is 10 times lower than that of polypropylene, copper and brass, and 20 times lower than that of steel. Due to this, the metal-plastic pipeline is more compact, communications can be laid in hard-to-reach places. In addition, for the normal functioning of the system, smaller pumps are needed. For the same reason, the inner walls of metal-plastic pipes do not delay precipitation, so the passage hole does not coke.
3
The ductility of these products can significantly reduce the number of compounds. This means that mounting speed is increasing, a small number of fittings are used, and hydraulic resistance is reduced. Another advantage of metal-plastic is the stable shape retention during bending. The absence of internal stresses of the material allows to increase its life.
4
Unlike pipes made of metal and alloys, metal-plastic is electrically safe. It does not transmit noise and vibration, which attracts the attention of a consumer living in an apartment building. The possibility of corrosion in metal-plastic pipes is excluded, therefore, leaks for this reason are impossible.
5
The high strength of these products is ensured not only by using PEX polyethylene in their design, but also by the presence of an aluminum circuit. The burst pressure of the pipe exceeds 70 bar, which is a very high rate. Unlike polypropylene and metal pipes, metal-plastic allows the use of aggressive liquids and gases as a coolant. The reason for its chemical resistance
6
The advantage of this material is that it does not need external protection. He does not need a paint or a layer of anti-corrosion composition, which is necessary for metal products. The parameters of heat resistance for all types of pipes are almost the same, but metal-plastic significantly wins in simplicity, reliability and speed of installation. With it, you can implement any wiring system of hidden and open type.
