Modern refrigerators are made of inexpensive carbon steel with a polymer or paint coating. Therefore, during their transportation, the formation of various scratches is possible.
You will need
- - sandpaper;
- - gasoline;
- - putty;
- - enamel or acrylic paint;
- - white nail polish;
- - marker or corrector;
- - decorative magnet.
Instruction manual
1
To remove large scratches from the surface of the refrigerator covered with paint, take sandpaper, carefully clean the surface. Then rub with gasoline and putty. After the putty dries, thoroughly sand again and apply the paint with a small brush.
2
In addition to enamel, you can use acrylic paints. They dry out much faster and have no unpleasant odor. Just remember that they are less stable, so be careful when cleaning.
3
If the scratches are small, try simpler methods.
4
Minor damage is ideally masked by a special marker, which sketch scratches on cars. Shake it well before use and sketch the defects. Since it is not very cheap, buy it if there is a significant amount of scratches on the refrigerator.
5
A cheaper option is to paint the scratches with varnish for a French manicure. Buy a white nail polish. And carefully brush the entire length of the scratch. Do not apply too much varnish at once, it is better to make a thin strip, and after drying, if necessary, apply a second coat.
6
In the absence of special tools, use the usual corrector for texts. He is also able to hide small scratches. Just keep in mind that when thoroughly cleaning the surface of the refrigerator, it will be necessary to wash the painted areas very carefully. Or tint them regularly.
7
If you don’t want to bother with staining, hang the magnet in place of the scratch. This is the easiest and most affordable way. Magnets can also hide dents that were formed when transporting the refrigerator.
