Thermopot is a kind of hybrid of a teapot and a thermos. A household appliance is actually very convenient. The owners of a thermal sweat can drink tea immediately after they have such a desire - without waiting for boiling water. The answer to the question of how to use the thermal sweat is completely simple.
Instruction manual
1
Fill the thermal stream with plain tap water. It is not necessary to put the device under the tap. In addition to the thermal sweat, it will be nice to purchase a bucket of 1.5-2 liters. Such dishes are sold in any hardware store. Also, people looking for the answer to the question of how to use the thermopot with convenience, you can buy for him a jug of the same displacement. But you can, of course, pour water into a thermal sweat and a simple mug or jar. Pour water to the maximum level indicated inside the appliance.
2
Close the appliance lid, press the "Boiling" button and wait until the water boils. Heats the heatpot water as fast as any electric kettle. Of course, the device must first be connected to the network. The heating mode before boiling is desirable to choose the largest.
3
After the water begins to boil, switch the thermal sweat to the heating mode you need. To do this, press the “Select” switch button until the red light comes on next to the desired temperature on the instrument lid. Temperature conditions in different brands of devices such as thermal sweat, the instruction for use allows the use of different. Most often it is 60, 80, 90 and 98 C. After the boiling water cools down, the device will maintain its temperature at the level set by the owners for an unlimited time.
4
In order to pour liquid into a cup, substitute a mug under the spout of the device and press the corresponding button on the cover of the device. Sometimes the water supply is switched on in thermal fluxes also with the help of a tap. Also on sale there are models in which you should alternately press two buttons. One of them is responsible for blocking the outflow of water, the second - actually opens the faucet. Water will flow out of the thermal sweat only if the red indicator is lit next to the lock button.
5
In some cases, the thermal sweat scheme also provides for the possibility of heating water by a certain time. In such models on the roof there is a "Timer" button. By clicking on it, by switching, you can select the required heating time.
6
When using a thermal sweat, be sure to always have water in it. Otherwise, the device may burn out and the question of how to use the thermopt will become irrelevant. Monitoring water levels in modern devices like thermal sweats is very easy. To do this, you do not even need to open the lid of the device. All thermpot models have a full scale on the front panel.
7
Descale the electric thermal sweat from time to time. This procedure should be carried out with the same frequency as for a regular teapot. Wash like a kettle, right under the faucet can not be heated. It is allowed to use any household products for descaling. For example, citric acid can be used for this purpose.
8
As you can see, the answer to the question of how to use a thermal sweat is actually extremely simple. In some devices of this variety, among other things, there is also a button "Cleaning". In such a thermo sweat to remove scale you just need to pour a solution of citric acid. Next, click on the button. After a while, the walls of the flask of the device will become clean.
