A sealant is one of the building materials that can rightfully be called universal. It is difficult to wash this composition, but it is possible, and this can be done not only in dry cleaning, but also with improvised methods.
You will need
- - solvent;
- - cotton swab;
- - bandage;
- - toilet paper or newspaper;
- - iron;
- - board;
- - hydrogen peroxide;
- - washing powder;
- - stain remover;
- - sealant cleaner;
- - paint for clothes;
- - Washer;
- - refrigerator;
- - blade;
- - a wash for polyurethane foam;
- - scraper or cardboard;
- - vegetable oil;
- - water;
- - latex gloves.
Instruction manual
1
Take the solvent and, using a cotton swab, apply liberally to the sealant stain, iron it on top with a hot iron (temperature should match the type of fabric) through two layers of toilet paper or newspaper. Repeat procedure until pollution disappears.
2
Buy 98% hydrogen peroxide from a pharmacy. Put it on the bandage and then on the damaged item, wait until the composition stops foaming, and then rinse and wash as usual. After drying, no traces remain.
3
Visit hardware stores, purchase a special sealant cleaner and apply the product on a cloth, and then wash the item as usual. The color of the material at the spot may change, then after drying it can be tinted with paint for clothes or put in dry cleaning, where the shade will be restored.
4
Pull the stained cloth onto a hard board or other flat surface and place in the freezer, leave for two to three hours. Remove and cut with a blade. Your movements must be precise, sharp, but accurate, otherwise damage the material.
5
Use a foam cleaner. Gently apply it evenly on the fabric with a stain and wait, a thin film forms that can be removed with a blade or fingernail, then wash as usual. This method is also suitable for cleansing bright things, since it leaves no traces after the procedure.
6
Try to remove the sealant immediately after getting on the thing, without waiting for it to dry. You can remove the composition with a scraper or cardboard and then use a stain remover and wash. Apply stain remover in accordance with the instructions.
7
Take any vegetable oil, pour it on a cotton swab and wipe the stain with the composition. The oil should dissolve the sealant. Then wash the item in hot water and dry. No traces should remain.
Useful advice
Wear rubber gloves when handling the fabric, and make sure that the sealant does not get on the skin. If the product does get on your face or hands, immediately rinse them under warm water and thoroughly wipe dry parts of the body. Repeat the procedure if necessary.
