Shock absorbers in the washing machine prevent the device from vibrating during washing and spinning. And if household appliances began to jump during operation, then it's time to check the shock absorbers: repair them or replace them.
There are several reasons for the shock absorbers of the washing machine to break. Firstly, this may be due to improper transportation or defective parts. Secondly, the problem arises from the failure of the rod holding the shock absorber. Thirdly, if the machine began to jump after prolonged use, it means that the gaskets are worn out.
Problems with shock absorbers can be noticed even before opening the structure. It is enough to pay attention to her work. If, during washing, it creaks and jumps during the spin cycle, it is these details that have broken.
How to check shock absorbers
Before thinking about restoring or replacing, check the shock absorbers of the washing machine. This can be done independently at home. First unscrew the screws and remove the device cover. Then press hard on the tank from above to lower it, and then release it sharply. If the part immediately fell into place, the shock absorbers are serviceable, and if the tank does not stop swinging, you need to do repairs.
How to find shock absorbers in a washing machine
Before you repair the shock absorber in the washing machine with your own hands, you need to find these parts. They can be from different sides, it depends on the model of the device.
First remove the cover by unscrewing all the bolts, then remove the lower plastic panel and powder receptacle, disconnect the upper panel and carefully lay to the side. It is important to ensure that all wires are intact and there are no further problems connecting to the control module.
Next, you need to remove the cuff and put it in the drum. To do this, just unclench the metal clamp. To find the shock absorbers of the washing machine, you will have to remove the front of the structure and unscrew the locks. After that, a broken part can be found under the tank.
