The problem of various kinds of stains on leather furniture or things is quite common. It is possible to eliminate it even without resorting to dry cleaning services, but using simple and affordable people's advice.
You will need
- - ammonia solution;
- - acetone;
- - turpentine;
- - gasoline;
- - talc;
- - soap;
- - tea soda;
- - ammonia;
- - formalin;
- - magnesia;
- - water.
Instruction manual
1
As a rule, you can remove a greasy stain from a leather product using an ammonia solution, acetone, turpentine or gasoline. But this method is suitable if the skin does not contain nitro coating.
2
No less effective in the fight against greasy stains tea soda. To do this, dilute 1 teaspoon of baking soda in a glass of warm water. Carefully rub the desired area with the resulting solution until a foam forms. After that, remove any residual dirt with a dry cloth. Repeat this procedure until the pollution has completely disappeared.
3
Also, talcum powder, mixed to a paste-like state with gasoline, is often used to remove dirt on the skin. The resulting mixture is applied to the contaminated area and leave for 2-3 hours. After the fat is completely absorbed into the powder, brush off the remaining mixture with a brush and wipe the area with a damp cloth.
4
A solution of ammonia fights very well with greasy spots. To do this, mix 1 teaspoon of warm water with 1 teaspoon of ammonia and 1 teaspoon of soap chips. By the way, water in this case can be replaced with milk. The resulting consistency wipe the stain until it is completely removed. Rinse off the rest of the solution with clean water.
5
If the stain is very absorbed into the leather product, then a formalin-based product will help you. To prepare it, you will need 1 tablespoon of soap chips, 1 tablespoon of ammonia solution (5%), ? glasses of formalin. Mix these ingredients and apply on a grease stain for 1-2 hours. Next, rub the contaminated area with the same solution. At the end, wipe everything with warm, clean water. Repeat if necessary.
6
A greasy stain on fair skin is treated with a special paste. To prepare it, you need 1 teaspoon of gasoline, 1 teaspoon of talcum powder, 1 teaspoon of magnesia (powder). Mix all ingredients thoroughly and apply to a contaminated area. After 15-20 minutes, add a little gasoline to the mixture and leave everything to dry completely. After that, remove the remaining powder with a dry cloth or brush.
