Epoxy adhesive in the prepared state retains plasticity for 1 hour. Full drying occurs within 24 hours. Sometimes, with complex repairs, you have to glue for several days in a row, but each time there is no need to spread glue. You can save the already prepared epoxy.
You will need
Epoxy resin, hardener, glue container, foil, lighter.
Instruction manual
1
Dilute resin with hardener as directed. On a piece of foil, apply 2-3 drops of glue and heat above the flame of a lighter. If within 10 seconds the solution boils and hardens, then the glue is ready for use.
2
Carry out the necessary repairs with glue. Place the solution container in the freezer of the refrigerator. In the frozen state, the adhesive retains plasticity for 5 days.
3
When reusing the prepared epoxy resin, the solution must be thawed for 10 minutes at room temperature. Use as glue just prepared.
note
Resin readiness checks should be carried out in a well-ventilated area. Adhesive fumes are toxic and may ignite.
Useful advice
Spread glue in the required amount. After freezing, the resin does not lose its properties.
