Hot waxing is a fairly common procedure. This affordable tool allows you to permanently get rid of excess body hair without visiting a beauty salon, at home. Typically, a viscous mixture with various cosmetic additives is sold in cans, cassettes or cartridges. In order for the epilation process to be effective, it is enough to read the instructions for the package of the product and properly heat the wax.
You will need
- - wax for hair removal;
- - a heater for wax (wax);
- - microwave;
- - tanks for a water bath;
- - a double boiler;
- - Bowl;
- - spatula.
Instruction manual
1
Open the wax container and completely remove the protective foil from it. Install open containers in a special heater (wax). If you regularly do hair removal at home, it makes sense to purchase such a device. Please note that there are different types of it - for jars with wax, cartridges, cartridges. Some advanced models of heaters are universal, they can heat the product, regardless of its packaging.
2
Follow the instructions for use of the wax alloy. Modern devices are equipped with high-frequency thermostats, so you do not need to constantly monitor the melting temperature - it will be maintained automatically.
3
If you don’t have a special device for heating wax, use a microwave. Make sure that no foil residue remains on the opened packaging. The time for heating the tank will vary depending on the amount of the mixture in the tank and the power of the microwave - this is approximately 30 to 60 seconds. Usually, the duration of heating is indicated on the packaging of the product.
4
Prepare a hair removal tool in a water bath or double boiler. With the help of hot vapors, solid wax, which is usually sold in granules, discs and briquettes, can also be melted. Fill one pan with water and place smaller dishes in it. In this case, the liquid level should not be higher than the level of wax.
5
Put the pan on a large fire and make sure that moisture does not get into a viscous product in any case - otherwise it can burn you when removing hair, and the quality of depilation will become lower. Leave the dishes open.
6
After boiling water, reduce the heat and continue to heat the wax. Keep it on the stove for 5 to 10 minutes, depending on the amount of funds in the bank. Do not let the viscous liquid boil!
7
Cut the solid raw materials into small pieces and place in a bowl. It can be installed in a water bath or a double boiler. Already at a temperature of 54 degrees, the melting of the wax will begin. The process will be completed when all particles of the substance turn into a homogeneous mass.
8
Check the wax temperature before proceeding to cosmetic procedures. It should not exceed 60 degrees, otherwise you will get burns. Knead the mixture thoroughly, moving the spatula from the center of the container to the edges. Apply a small amount of the substance on the wrist from the inside - the finished wax should be hot, but at the same time comfortable.
