Casio watches are made in Japan. But this does not mean that they cannot break. Sometimes the reason for stopping is the contamination of the mechanism, drying of the oil and water entering the body. If you are confident in your abilities, then try to disassemble the watch, rinse and lubricate their mechanism. Before disassembling, carefully study all the steps.
You will need
- - tweezers;
- - conical screwdriver.
Instruction manual
1
Before disassembling a Casio watch, prepare a workplace. To do this, put them in front of you on a sheet of white paper. Remove the bracelet or strap. Using a special key or tweezers, unscrew the back of the watch. Remove the rubber gasket and gently pull out the nylon ring.
2
Put the transfer shaft into the arrow translation mode, then remove it. Remove the mechanism from the case and replace the transfer shaft. To do this, it must be put in the hole of the board until it stops. Using special tweezers, remove the second hand, remove the minute and hour hands with a screwdriver. Try to do everything carefully, as the arrows can easily break.
3
Turn the screws on the back of the dial 90 degrees. Remove and carefully inspect the switch mechanism. Check the adhesion and position on the axis of the bill and watch wheels, to do this, rotate them in the forward and reverse directions.
4
Remove the anchor bridge and the anchor itself, fully lower the crown. To do this, insert a screwdriver into the screw that secures the drum wheel, then slightly retract the compression spring and wait for it to fully unwind. Carefully remove alternately the center, intermediate, second and anchor wheels. Then inspect the teeth and remove the drum from the platinum.
5
Rinse all parts of the watch in gasoline. Pour it into a small transparent vessel so that the level does not exceed 2 cm. First wash the larger parts, then the smaller ones. Carefully clean the contaminated grooves with a brush or a pointed stick. Blow out washed parts with a jet of air from a rubber bulb. After cleaning, take them with tweezers.
- watch disassembly
- clock disassembly
- Removing and replacing lamps in the taillight VAZ 2108, 2109, 21099
