Jackets are no less polluted than other things. Dust, dirt and urban smog settles on them, which leads to a deterioration in appearance. You can wash the product at home without damaging the fur or other filler.
You will need
- - powder;
- - air conditioning.
Instruction manual
1
Unfasten all decor elements that are attached from the fur jacket. The belt and hood should be washed separately. Look for stubborn stains anywhere. If contaminants are found, treat them with a modern stain remover that does not damage the color.
2
Pour some warm water into a deep basin, add liquid detergent. If you have a jacket made of natural fur, use powder for woolen products. Beat the foam and immerse the product for 10-15 minutes. Use a sponge or a soft brush to clean the cuffs and collar, because it is in these places that severe contamination appears. Do not forget to wash the hood and belt.
3
Rinse the product thoroughly in clean water until it stops foaming. It is not necessary to use the conditioner, but if you want to facilitate the ironing process, add a little funds at the last rinse - check the dosage on the package.
4
Squeeze the jacket lightly and hang it on your shoulders. You can also put it on a thick terry towel so that the remaining moisture drains. Using clothespins is highly undesirable - there will be traces.
5
After complete drying, shake the jacket, comb the fur. Fasten all the decor elements that you removed. If you want to put perfume on a thing, make sure that no spots appear on it. It is best to spray perfume on the inside of the product.
note
If you have an expensive jacket that you are afraid to spoil, it is best to hand dry clean it. After washing, the product does not always look good.
Useful advice
You can wash a fur jacket in a typewriter. To do this, set the delicate mode, low spin speed and an additional rinse. Add liquid powder to one compartment in a medium conditioner. You can also put a few tennis balls in the drum so that the fur does not crumple.
