Traces of glue on the glass may remain after repair work or from the manufacturer's stickers. Try to remove stains as soon as possible. Otherwise, it will be more difficult to wipe off the glue.
You will need
Dishwashing liquid, ammonia, gasoline, kerosene, white spirit, acetone, wiper.
Instruction manual
1
Prepare the following solution. Mix 1 teaspoon of dishwashing liquid and 1 tablespoon of 10% ammonia. Put the resulting solution on a contaminated area of glass and leave for 1 hour. During this time, periodically wet the stain. When the glue softens, carefully remove it with a clerical knife or other sharp object.
2
Buy a wiper at a car shop or gas station. Apply on stain and wait a few minutes. Then remove the glue with a clerical knife.
3
If you did not have a wiper on hand, use gasoline or kerosene. Moisten a cotton pad in solvent and apply to contamination for 15 minutes. After this time, scrape off the glue with a clerical knife blade.
4
To clean the glass of glue stains, you can use acetone, white spirit or nail polish remover. Put the product on a dirty place and wait a while. Remove glue marks with a scraper or razor blade.
5
Carefully remove fresh spots from PVA glue with a paper towel. Then wipe with a foam sponge dipped in clean, warm water. Dry with a cotton towel and polish. Aged stains must be softened before removal. Therefore, apply a little dishwashing detergent diluted with water to the contaminated area and leave for a while. Then wipe the glass with a soft cloth.
6
After the glass has been completely cleaned, wash it. You can use a wiper for this. Spray the product evenly onto the surface, remove dirt with a cotton towel and polish microfiber cloths to shine. You can also dilute ammonia in water - 1 tablespoon of ammonia in 5 liters of water.
