Samsung technology has been very popular and in great demand for many years. And we are talking not only about phones and laptops, but also about household appliances. Samsung's quality has been proven over the years. But even the most high-quality and durable things from time to time break or completely stop working.
What to do if such a problem happened with such a necessary household equipment as a Samsung vacuum cleaner?
Consider a model of a vacuum cleaner samsung sc6573 and how to repair it yourself if it stops turning on.
If at one point the vacuum cleaner turns off and does not turn on, first check to see if it is overheated. When overheating, to protect, the vacuum cleaner may turn off. In such a situation, he just needs to give 10-15 minutes to cool. If after cooling this time it still does not turn on, then you need to check the power. To use another outlet, it is possible that she stopped working. But if, the vacuum cleaner still does not turn on, then it is necessary to look for the cause in it.
Next, you need to check the most common causes of failure, why the Samsung vacuum cleaner may not turn on or spark:
- we check the cord, it is likely that it breaks near the plug;
- We check the operability of the power button on the case, it is likely that the contact has burned out. This very often happens due to constant vibration and frequent use;
- check the thermal fuse of the vacuum cleaner. It is located in the motor itself, you will need to disassemble the vacuum cleaner. The thermal fuse is installed to protect the winding from overheating;
- we check the motor, there is a high probability that either it is broken, or the brushes are wiped;
- when inspecting the engine, we immediately check the bearings for a malfunction. To do this, you need to take him in a scribble and swing slightly in different directions for the anchor. If the shaft feels loose, then replacement bearings cannot be avoided.
Before disassembling the vacuum cleaner, unplug it from the outlet. Even if it does not turn on, voltage is still supplied to it.
If the problem is in the brushes or the bearing, then they can be replaced on their own, without turning to the master for help.
