Logo en.decormyyhome.com

How to wash plastic windows so that there are no stains

How to wash plastic windows so that there are no stains
How to wash plastic windows so that there are no stains

Table of contents:

Video: HOW TO REMOVE STAINS FROM PVC WINDOWS 2024, July

Video: HOW TO REMOVE STAINS FROM PVC WINDOWS 2024, July
Anonim

The advantages of plastic windows are undeniable, they greatly facilitated the life of housewives: they do not need to be painted, putty, and insulated for the winter. But in order for the plastic window to last longer, it must be properly looked after.

Image

How to wash a plastic window

If your window has been installed recently, and you decide to put it in order, first of all, you need to remove the protective film from the plastic frame. If you miss this moment and don’t remove it right away, the film can stick tightly to the plastic, tearing it off will be difficult and the window may be damaged.

As in the case of wooden windows, it is necessary to start washing from the frame. To wash the plastic profile, it is necessary to prepare a basin with warm soapy water, rags from soft tissues or napkins, which include microfiber. Plastic does not tolerate brushes or washcloths that scratch the surface.

As for detergents, their choice in stores is so great that every housewife buys cleaners, guided by personal preferences. By the way, even liquid detergent for dishes is suitable for washing plastic, the main thing is that it does not contain abrasives. But using strong products, which include solvents, gasoline or alkali, is not possible.

To wash high windows in places where it is impossible to reach by hand, a special mop on a long handle is used.

How to wash a plastic window

The plastic profile is easily cleaned with a soapy damp cloth. Contaminated areas will require a little effort, but in no case should you scratch and scrape.

Be sure to clean the drain hole. It is located at the bottom of the window. Dust, poplar fluff, and other dirt gets into this hole. If the drainage hole is clogged with dirt, the window will freeze heavily in winter.

The next step is to clean the rubber seals. This is an important part of the window, the care of which is mandatory. It is necessary to wipe all the gum with a wet rag and wipe it dry immediately. Each time, caring for the window, you should pay attention to the integrity of these elements, check for scratches and cuts on them. Dry rubbed gums must be lubricated with silicone grease. You should also treat all accessories with special oil. These products are usually sold as a set.