For the fur to serve longer, you need to properly care for it. Moreover, he is very moody and delicate, especially white fur. Products from it retain their attractiveness for not very long. They quickly fade and turn yellow, and pollution can be seen on them immediately. Therefore, sooner or later, the question arises of washing the fur.
You will need
- -lemon juice;
- -ammonia;
- -shampoo;
- -starch;
- -petrol.
Instruction manual
1
The cleaning mechanism depends on the type of white fur (artificial or natural). There should not be any special problems with faux fur. This is a textile product with a pile. Wash in warm water (not higher than 40 degrees) with powder or shampoo.
2
Rinse well and do not twist, just squeeze slightly, wrap in a sheet and then dry in a straightened form at room temperature.
3
If the faux white fur is yellow, then apply a mixture of water and lemon juice to it, mix them in equal proportions, and brush it.
4
Natural fur is more complicated. Furriers recommend protecting it from rain and snow, and even more so do not advise it to be washed, since the skins can begin to sprawl and hairs will fall out. Therefore, in case of severe contamination, it is better to return such a product to dry cleaning, while choosing a specialist that specializes in cleaning fur products.
5
Given that the fur withstands an average of 5 dry cleaners, if you just need to refresh the fur, clean the house. This will be the so-called dry wash. Before holding it, check the mesdra for strength. To do this, mix 50 ml of warm water, 2 drops of ammonia and 1 drop of shampoo, apply drops on the mezra in different places. If when you try to stretch it, it does not break, then you can "erase" it.
6
Sprinkle the fur with potato starch and gently rub the product, then spray it from the spray bottle with soapy water and rub it again. Leave the fur to dry at room temperature when it dries, brush it well and comb it.
7
If there are greasy spots on white fur, wipe them first with a cloth moistened with a solution of gasoline and washing powder, then with clean gasoline, and then starch. You can use a paste of gasoline and starch.
8
If you need to clean the entire coat, for example, from a rabbit or arctic fox, then open the lining, take 2-3 kg of starch and "bathe" the fur in it with your hands, as in normal washing. After that, shake the fur coat well, brush it with a clothes brush and comb it. The result will make you very happy.
