During construction work, drops of polyurethane foam may get on the clothing, forming stubborn stains. Do not rush to part with the thing, try to clean the pollution with the help of special tools.
You will need
Aerosol cleaner, refined gasoline, white spirit, acetone, nail polish remover.
Instruction manual
1
Use a sharp object to remove the mounting foam. Be extremely careful not to ruin your clothes completely. Then take a special aerosol cleaner. It can be bought at a hardware or hardware store. Before using this product, make sure that it does not damage the material. To do this, apply a couple of drops of the cleaner to an inconspicuous place and leave for a few minutes. If nothing happens during this time, continue cleaning.
2
Shake the cleaner bottle several times. Then gently apply a small amount of the product to the contaminated area of clothing. Try to get the cleaner on the mounting foam, not on the fabric. Leave in this position for 20-25 minutes. After this time, wipe the sheet with a damp foam sponge or cloth. Then rinse the fabric in running water and wash with highly active powder. If the first time it was not possible to clean the mounting foam, repeat the procedure from the beginning.
3
Take advantage of the fabric. Dampen a cotton swab or gauze swab in a solvent and apply to a stain of mounting foam. Wait a few minutes and remove contamination. Under the influence of the product, the foam gradually dissolves. Rinse the mark from the spot under running water and wash with stain remover.
4
Pack the soiled clothes in a plastic bag and put in the freezer. After some time, remove the mounting foam with a sharp knife or nail scissors. Then treat the spot mark with a cotton swab dipped in acetone or nail polish remover. Rinse clothes in running water and wash with highly active powder.
