Gradually, gold items lose their original shine and become dull due to the formed plaque. To return dazzling shimmer to gold earrings, they must be carefully cleaned with gentle products that do not contain acid, otherwise your jewelry will become worthless.
Instruction manual
1
Take a GOI paste and a soft cloth. Clean the earrings from all sides, avoiding the area with stones and other decor. If the product has deep scratches, it is better not to use a paste, as it will clog into microcracks and give a greenish tint to the metal.
2
Pour into a small but deep container of water. Add some powder or dishwashing detergent without chlorine. Mix well and immerse the earrings in the resulting solution. Place the container on a stove over low heat and simmer for about an hour. Then rinse the product under cold running water and wipe it with a soft cloth.
3
Add 1 tablespoon of soda to 200 ml of water. Boil the solution and dip the gold product into it. Be careful, when boiling, the soda begins to foam very much and may leak onto the stove. After processing, wash the product in cold water and wipe it with a cloth moistened with ammonia.
4
Mix hydrogen peroxide with ammonia (1: 1). Put the earrings in the solution at night, and in the morning just rinse with clean water. If necessary, brush with a soft toothbrush.
5
Mouthwash helps eliminate plaque from gold jewelry. Pour a little funds into the glass and immerse the product in it for 2-4 hours. The solution of toothpaste and water works in a similar way.
6
Brush a little mint toothpaste for sensitive teeth that does not contain abrasive particles. Clean the gold jewelry well. Rinse in cold water and wipe dry with a flannel cloth.
7
Buy a special liquid that is used to clean jewelry. Before completely immersing the product in it, apply a small amount of solution on the inside of the earring and wait a bit. If no adverse reactions are observed, feel free to proceed to the purification of gold. You can read the detailed instructions for use on the packaging.
