If the old lampshade has fallen into disrepair, then do not rush to throw out the lamp. For her, you can make an amazing accessory from threads, paper, plastic bottles and even plastic spoons.
Let the pineapple burn
To turn an old lamp into a vintage thing, no special materials are needed. If you have accumulated several disposable spoons left over from a picnic and have a round 5-liter bottle, then fine.
Take it, cut off the tight neck and bottom. Using scissors, separate the spoons from the cuttings. They will not be needed. When cutting, leave 2 cm of cuttings on each spoon. Paint the curved part yellow. Let it dry
Starting from the bottom of the plastic bottle, glue the spoons to it so that the painted part is on top. To do this, apply glue for plastic to those 2 cm of the remaining cuttings and attach to the base. After gluing the first row go to the second and spoons cover the entire plastic bottle.
Their green paper cut a ring, the inner hole of which should match the diameter of the upper cut of the plastic bottle. Scissors make the outer edge of the paper ring zigzag. These will be pineapple leaves. But so far they are few.
From the same paper, cut the rounded strips with a pointed edge and insert them into the top hole of the bottle, on which a zigzag paper ring has already been worn. Lampshade for the Pineapple lamp is ready.
To prevent a fire, use an LED or low power lamp. This applies to almost all home-made lampshades.
It is easy to make a lampshade imitating multi-colored glass from the same plastic bottle. Cut it off the shoulders. The lower part is not needed. Draw some ovals on the plastic. Now cover their borders with sealant. When it dries, apply silver paint on it, and walk inside the ovals with multi-colored.
Cut off the thick neck and install a new vestment on the lamp.
